The safety anchors are made primarily for
equestrian use. The 50x460LP is used extensively for horse jumps, the
50x770LP and the 50x870LP are used for horse shelters. They can be
installed and removed many times.
In some areas, planning permission is needed for permanent fixed structures, for example; stables and shelters, however, using our anchors, the shelter can be safe and still be considered to be temporary and therefore outside the planning requirements.
Approximate length: 460mm
Min anchor strength: 4000kg
£21.50
Approximate length: 660mm
Min anchor strength: 4000kg
£25.40
Approximate length: 770mm
Min anchor strength: 4000kg
£29.75
Approximate length: 870mm
Min anchor strength: 4000kg
£34.30
Material: Steel 100mm wide, 5mm thick.
Holes: 10mm
£7.50
£4.25
£10.90
In some areas, planning permission is needed for permanent fixed structures, for example; stables and shelters, however, using our anchors, the shelter can be safe and still be considered to be temporary and therefore outside the planning requirements.
50 x 460 Erdanker® Low Profile Safety Ground Anchor
Diameter: 50mmApproximate length: 460mm
Min anchor strength: 4000kg
£21.50
50 x 660 Erdanker® Low Profile Safety Ground Anchor
Diameter: 50mmApproximate length: 660mm
Min anchor strength: 4000kg
£25.40
50 x 770 Erdanker® Low Profile Safety Ground Anchor
Diameter: 50mmApproximate length: 770mm
Min anchor strength: 4000kg
£29.75
50 x 870 Erdanker® Low Profile Safety Ground Anchor
Diameter: 50mmApproximate length: 870mm
Min anchor strength: 4000kg
£34.30
T505 Fitting for JF range and Low Profile Safety range
Approximate size: 120mm x 100mmMaterial: Steel 100mm wide, 5mm thick.
Holes: 10mm
£7.50
Rubber cover
Only suitable for the T505 bracket£4.25
Spanner
Suitable for removing LP anchors. It is useful but not essential£10.90
